ProNature Outdoor Wood Sealer 1L

ProNature Outdoor Wood Sealer 1L

ProNature Outdoor Wood Sealant is a special blend of plant oils created to protect and maintain all your exterior wood. Stain and seal in one easy application, and loads of colours to choose from this premium woodcare range.

Coverage:
Approximately 20-30 m²/litre per single application on new timber. Application rates depend on the substrate, type of processing and surface quality. Exact consumption needs to be established with on-site test coat.
For optimum durability apply 3 coats.

Application:

• Product is ready to use. Do not dilute. (However, depending on the type of wood, thinning the first coat by 10% with ProNature Plant Turpentine may be required.)
• Surfaces previously coated: remove all coating by sanding/paint stripper.
• Sand the surface to 100 – 150 grit.
• Remove dust thoroughly.
• Stir well with flat paddle until pigments and oil are completely combined. (Shaking won’t do it!)
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth like ProNature Mutton Cloth.
• Leave to dry for a minimum of 6 hours and if necessary – lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
• The finish will take about 7 days to fully cure. Avoid standing water or any other liquids and wet cleaning (only sweeping instead) during this period. NB: Cold weather and/or high humidity will prolong the drying process.

Learn More Here.
View Our Woodcare Here.