ProNature Oil Colour Concentrate 1L (Great White)

ProNature Oil Colour Concentrate 1L (Great White)

ProNature Oil Colour Concentrate, where a little goes a long way, contains the highest pigment concentration. It is a Wood Stain & Seal in One Product for all exterior and interior surfaces. From bright white, red, blue and green hues to beautiful rich chocolate browns and intense black, you decide. Give your wood the ultimate UV protection and a glamorous look.

Uses

• Clean & Care
•  Essentials
•  Junior
•  Wall & Stone Coatings,
• Wood Finishes

Coverage:
Approximately 10 – 15 m²/litre per litre on new timber. Application rates depend on the substrate, type of processing and surface quality. Exact consumption needs to be established with on-site test coat. For optimum durability apply 3 coats.

Application:

• Product is ready to use.
• If surface been previously coated: remove all coating by sanding/paint stripper.
• Surface must be dry, clean and dust-free. Sand wood to a fine, smooth finish – min grit 100.
• Stir well until pigments and oil are completely combined. (Shaking won’t do it!)
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth e.g. ProNature Mutton Cloth.
• Leave to dry for a minimum of 6 hours and -if necessary- lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
• The finish will take about 7 days to fully cure.
• During this period, avoid standing water or any other liquids and when cleaning sweep instead.
• NB: Cold weather and/or high humidity will prolong the drying process.

Application for creating own tint:

• Add to ProNature Outdoor/Indoor/HardWax Oil/Wax Balm/Rock Natural Clear until the desired colour shade is reached and stir very well also during application.
• Drying time:
  High concentrations of ProNature Colours might prolong the normal drying times significantly.
• If darker shades are required apply multiple layers. When used concentrated (not diluted in any of the products listed above) apply a clear layer.

Learn More Here.
View Woodcare Range Here.