ProNature Indoor Wood Sealer 5L

Coverage:
Approximately 20-30 m²/litre per single application on new timber. Application rates depend on the substrate, type of processing and surface quality. Exact consumption needs to be established with on-site test coat.

For optimum durability apply 3 coats. Watch this short video! https://www.pronature.co.za/tips-tricks/

• Product is ready to use.
• Do not dilute. (However, depending on the type of wood, thinning the first coat by 10% with ProNature Plant Turpentine may be required.)

Surfaces previously coated:

• Remove all coating by sanding/paint stripper.
• Sand the surface to 100 – 150 grit.
• Remove dust thoroughly.
• Stir well with flat paddle until pigments and oil are completely combined. (Shaking won’t do it!)
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth i.e. ProNature Mutton Cloth.
• Leave to dry for a minimum of 6 hours and – if necessary – lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
• If an additional application with ProNature Wax Balm is desired, allow ProNature Indoor to cure for a minimum of 24 hours before wax application commences.
• The finish will take about 7 days to fully cure. Avoid standing water or any other liquids and wet cleaning (only sweeping instead) during this period. NB: Cold weather and/or high humidity will prolong the drying process.
• Scan QR Code for quick access to this page:
• Product is ready to use. Do not dilute. (However, depending on the type of wood, thinning the first coat by 10% with ProNature Plant Turpentine may be required.)

Surfaces previously coated:

• Remove all coating by sanding/paint stripper.
• Sand the surface to 100 – 150 grit.
• Remove dust thoroughly.
• Stir well with flat paddle until pigments and oil are completely combined. (Shaking won’t do it!)
• Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
• Rub off any excess oil thoroughly that has not been absorbed after about 10 min using a lint-free cloth i.e. ProNature Mutton Cloth.
• Leave to dry for a minimum of 6 hours and – if necessary – lightly sand the surface before applying the next coat, repeating the same process: apply, let it penetrate and rub off excess.
• If an additional application with ProNature Wax Balm is desired, allow ProNature Indoor to cure for a minimum of 24 hours before wax application commences.
• The finish will take about 7 days to fully cure. Avoid standing water or any other liquids and wet cleaning (only sweeping instead) during this period. NB: Cold weather and/or high humidity will prolong the drying process.